Innovaphone IP200 and Asterisk

I tested the IP200 by Innovaphone connected to my Asterisk VM at home and it worked quite well. It’s not restricted to Innovaphone PBXs, even though some special features are only available to IP200s connected to a PBX from the same manufacturer.

Just reset your device, use the admin:ip200 login to the web interface and connect it to your Asterisk. In my FreePBX installation the related extension 42 uses the following SIP parameters (password XXX and LAN IP range x.x.x.0/24):

_deny=0.0.0.0/0.0.0.0_
_secret=XXX_
_dtmfmode=rfc2833_
_canreinvite=no_
_context=from-internal_
_host=dynamic_
_type=friend_
_nat=yes_
_port=5060_
_qualify=yes_
_callgroup=_
_pickupgroup=_
_dial=SIP/42_
_mailbox=42@default_
_permit=x.x.x.0/24_
_callerid=device <42>_
_callcounter=yes_
_faxdetect=no_